vArranger Forums

I am also waiting too!

Hi Dan!
Please, send me the new version of the vArranger.

Thanks.

Hi Dan! Please send me the new update of V1.17.90.

Thank you,
Vasik.

Thank you,Dan!

Vasik

Hi,Dan!
I want to try the 64 bit version too.

Thanks,
Vasik.

Many, many thanks Dan!

Hi, Dan!
Please, send me too?

Thanks

Hi Dan,
Please send the update to me.

Thank you Dan!
Vasik.

Hi,Dan! I downloaded the Tyros 5 internal styles and i can't play on my v.1.17?
Let me know what is the problem.

Vasik

Hi to all,
Who can tell me, the Audia internal styles are compatible with varranger? If yes, where they find?

I have Novation 61 SL MKII and i would like to say, no better
controller then this to manage the vArranger.

+++1

Yes John, you correctly noted that the leslie is slowly picks up the speed and at this time, it seems like ther is a singing Donkey and when it picked up the speed it's not Leslie, but it is frequency vibrato.

Vasik

Hi Dan!
May I try the vArranger v.1.16 Beta 3 too?

Vasik.

The keybed is nice and  you can even adjust the velocity however you want.
I have it and I'm using it with vArranger and i really like it.
You can go to the store and check the demo before you buy it.

Vasik. 

Hi Bernie!
No controller at this time to have enough sliders and knobs to  control the vArranger.
The best midi controller now is Novation 61 SL MKII, with this piece you'll get more controls in vArranger
then with other controllers. You can assign all knobs, sliders, pads and transport buttons.

Vasik.

Hi Dan!
Not any results,just is heard trough the computer speaker, not thru the SD2.

Vasik.
 

On Sonar and Cantabile is selected omni.
Let me know, on Sonar or Cantabile the outputs should be unchecked?

Vasik.

Yes, on Sonar and on Catabile is blinking, on vArranger blinking  too,
but no sounds.

Vasik.

Useless, the indicator of right 1 track is jumping, but no sound.

Vasik

Yes, thru Sonar X1.
Just let me know, how to load it inside a VST host?
I know how to do in other DAW's, but in vArranger i don't know how to do it!
I need more explanation.

Vasik.

Sorry but from my knowledge i don't know the meaning of the word (cantabile), therefore i don't understand what you are saying. Could you clarify what it means?

Vasik.

Hi Dan!
I installed the vb3 organ and I don't know
how to do to play it thru the vArranger, but the vArr. doesn't see it.

Vasik

nothing changes !

Hi Dan!
I did, and no lesli effect .
But, what do you mean about play new notes?

Vasik

How?...., but only on new played notes!!!

Vasik

Hi Dan!
I have a problem with my rotor.
When I'm moving the mod.weel, on the
drawbars track is changing from chorus
to rotor slow, then to rotor fast, but the
rotor doesn't work onSD2. What is the problem?

Vasik

Thanks Dan.

Vasik.

Thank you very much Dan!

Vasik.

Hi Dan!
Please reply to previous comment.

Vasik.

I want to edit the song. In vArr. the song  playis from the beginning to end and it is somewhat the same.
And I want to change in some places to make it diferent.

Vasik

One

Ok! Thank you,

Vasik

Ok, this month is ok, but....the next month is to far

Vasik

And when will be the next update?

Vasik

Yes!

Hi Dan,
Please, teach me how to save a song and than open in Sonar?

Vasik

Who knows how works casm edit for Yamaha styles?

 I did. just work like midi controller without the knobs.
The knobs are not assignable. No midi events in option/controller

Vasik.
.

Dan, I assigned the var.A to the pad 1, and when I tryed
to assign var. B to the pad 2, then the windows didn't let
me assign, it says  the var. A. was assigned.
Then, I tryed to assign the fillings, the intros, the endings;
I got the same ansver. If the one pad is assigned, then will
work all pads for one think.

The Roland GW-8 work well with Pro Tools, Reason etc....
but with vArr. doesn't work, just blinking one small indicator
on the top of vArranger.
Please explain me one more time step by step, and then I'll try again.


Vasik

Hi Dan,
Just i connected my Novation Impulse 61 midi controller to the laptop and assigned all 9 fathers, 8 knobs, 9 buttons and
all 6 buttons of transport bar and work perfect. I couldn't assigned the pads, because i think the pads are connected together and when i assigned one pad, then rest of the pads was responding.
In total i have had 32 controls on varranger from my Impulse controller.That's good!

Dan, tel me please, how to connect my Roland GW-8 or how to assigned to the varranger to work?
I connected through USB and i selected the Roland GW-8 to midi in and SD2 to midi out and no sound, just the indicator
blinking on varranger.

Vasik

Hi Lionel!
When i read your comments my kb. was on the way. It's the Novation Impulse 61.
But i have a problem with it. The thing that works is just the p.bend and mod. wheel, and i don't know how to set it up with varr. to function all knobs..... or rather to have a full control over the vArranger.
If you know anything or know anyone that would know please comment

Thank You!
Vasik.

Thanks guys so much!

Hi Dan!
Now a'm using...m- audio key station 61.

Vasik.

Hellou my friends!
I have a news and I want to share it with all of you.
I bought the SD2, and the vArranger.
But I please all of you to give me advice.
What keyboard controller is the best to get the ful control over the vArranger?

Vasik.

Hi GUIs!
Then, send me a French user guide who have it!
I'll try to translate it!

Vasik.

Hi Dusan!
Thanks a lot for your comments, these will helpe to know more about the vArranger.
I found on the internet it several weaks ago and i was interested to know what is it,
but unfortunately very little information. If someone has a vArranger quide in englesh, please!
make a copy and send me on my email;  vasyhrishk@gmail.com

Best Regards
Vasik.

Hi Lionel!
Many Thanks for the information you
gave me. And I understood that, the vArranger
is like a manager, with it you can open and manage
the sounds from the sound modules, no more.

Thanks again and God bless you!

Vasik.

Hi Lionel!
Ok! After that the song is finished, how to burn it on CD?
If I'll buy the vArranger and SD2, it's inough to make a music?

Vasik.

Hi Lionel!
I understood how it work!
Just let me know one thing.Can I modify the style,
or mute some instrument for several bars. or short
stop, long stop ( like break) or shortly say, edit the song
and after that, save it.

Vasik.

Hi Lionel!
On youtube they just plaing, nobody
explains in English. Let me know, if I don't
have touch screen computer, how to select
the variations, fills or something else with
the mouse? To small information about it,
but it is expensive. I need more info. about it,and
then I'll decide what to do. Many thanks Lionel
Thank you for deciding  to help me, and I hope that
you'll help me continuely.

Vasik.

Hi Lionel!
I'm glad to hear good news from you.
Just let me know, if buy it, what is included
In it? This is downloadable or box? And how
Big file it is?

Vasik.

Hi lionel!
Thank you so much for responding to my comment, now i understand how to use it.
Will i be able to download it from somewhere  to try it for several to see how it work, and then i'll buy?
Vasik.

Hello everyone!
Please help me understand how the vArranger works.
I have more programs  and i know how they work, but this varranger i don't understand.
Is this full arranger with sounds and styles, or does it need to have external sounds and styles?
May i use this varranger with my Roland GW-8?
Where can i buy it?

Vasik.