vArranger Forums

Hi DAN,
please guide me, while playing, to use the function of the buttons ":Fill In : AA,BB,CC,DD .v.v.v. "
1/ in the case of "red auto button ON_active" it is easy to understand, if I play Main A it will play Fill AA then play Main A, and if I play Main C it will play Fill In CC then play Main C, so there is nothing to wonder.
2/in case of "red auto button OFF_deactive" if I am currently in Main C, I want to go to Main A but before going to Main A I want vArranger2 to play Fill In AA first by pressing the Full In AA button (here I wish it plays Fill In AA and then automatically goes to Main A but it doesn't) it automatically goes to Main C at the position I was standing before pressing the Fill In AA button
____ Is there a way from Main C, I press the Fill In AA button it automatically goes to Main A, I press the Fill In BB button, it automatically goes to Main B, etc. Can that be done?
___What is your opinion?

Hi DAN, please help me: if I want to learn deeply and be able to practice the parameters in the table: "SOUND EDIT CHANNEL", where can I find instructions?
I hope you can help me.

 Hope DAN explain: I have the GENOS2 soundbank that you provided with 69 files with the extension: .vsmpl.
Can you explain so that I can use them 1casch correctly instead of downloading all 6.23 GB into ram, and I also hope when playing with it I know which voice I am applying... now when playing it plays the sound and I can not choose? You should help me...
 By the way, let me ask you: I have many voices I took from the Yamaha VCP-505, the files have the extension: .VCE .... how can I use them?
Thank you.

For the second question, I will experiment and will present the results to you...

I asked about this I found in Manual :
https://www.varranger.com/wiki/index.php?title=5.10._MIXER

HI DAN,
When performing, I run this console parallel to the PC keyboard, everything is fine.

This console is 15cmx30cm in size....
I can arrange 32 control keys. Every time I practice a song and when I play for my friends, I only use these keys, I think it is more than enough...
I do it by: inside this keyboard there are 2 layers of nylon circuit, at the contact point if I want it to be "on" then I do nothing, and the contacts next to it I take insulating tape and stick it on, so even if I press it down, it will not create the "on" command...For example: on the console there is a big pink button labeled "b" when I press it down, there are 5 buttons in total: A, S, D, Z, X pressed but only one button creates the "controller" command of vArr2.

I wish I could describe what I did...I stood playing the guitar and swung my arm to press the key I wanted, for example "ending B", it was big so it was precise...that day I was happy to have created it...showed it off to my friends...

Now I can insert image.
can call 10 song,4 variation,4 fill IN, start-stop, 2 tntro,3 endings....more 

Hi DAN, I want to insert an image of the PC keyboard I made to control vArr2 when I present...how to insert.
"insert image " it appears !.!.!.
while the image I want to present it is in the computer....
help me do it right....
Thanks

Hi DAN,
I have saved the voice for left and right.
I have another question:
___When track left and right follow midi out, which channel is it assigned to? For example drum = 10...perc =9 ... left1, left2....right1, right 2...= ?. Please show me.
___And this question should have been tested before I was allowed to ask, but by the way, you read these lines, please explain: I practice in the "song chords" table, I do "export to midifile" and I get a midi file. So this midi file will have different midi out channels than the midi out channel of the song that created it, I think that's right...I have a hard time expressing my thoughts...I hope you can explain.
Thank you for everything...

Hi DAN,
on July 21st I was able to play the melody through MIDI IN 2 port into track "left"...according to your instructions.Please help me further:
___1 style I play in vArranger2 you named it "song" I made a lot of songs with a yamaha style....I want to save the "VOICE" of this melody "left" but I can't, I "SAVE" in "song", in "startup config." What should I do to be able to save the voice as I want. Do I have to use other programs? Please guide me.
Thank you.

Hi AGATON,
Thanks for your guidance, now I have abandoned the M-audio profires 610...it's too old...I bought another new one: Behringer UMC404HD it meets all my wishes...the driver runs well on Win 10...
Thank you.

Thanks DAN, I will read it carefully.

@Dan
 On the occasion of your instructions, let me know:
How to control Left 2, Left 3, and the "RIGHT" track groups, how to control, where are all these presented?
I have been holding vAranger2 for 10 years and now I still ask this, please forgive me., all because I want to control vArr 2 with guitar, it occupies all my mind, until now I have achieved it, now is the stage to play musical instruments well.
Thank you

@Dan,
Thank you, I have reset Midi IN according to your instructions, and I can play melody with Midi IN 2 port as I dreamed.
Another question: can I bring into "SAMPLES" many soundfonts files? How does vAranger2 manage this soundfonts group?
Thanks DAN

I apologize to you two DAN and agaton, I have been away from home for the past few days and it is not convenient to work on the computer.

I thank you both for your help.

About DAN's instructions, I will do it right away, there will definitely be something that needs DAN's help...

Hi agaton! Thank you, is there any word in the advertisement, in the product introduction that helps me know that an audio interface can meet multiple clients? Can you introduce me to some products with 3 types of prices from cheap to expensive? Now I am still using M-audio 610, because in my dream for vAranger2 from the beginning I still want to be able to control all 8 tracks of STYLES. But until now my level is still poor, so I do not dare to buy new and expensive things. I hope that one day everything will be clear.
Thank you both.

On the occasion of DAN's visit, I hope DAN can help me with another issue:
Is there any setup in cakewalkt by bandlab and vArranger2 to be able to use the same audio interface? I use the M-audio 610 profires interface...I've been struggling for a long time and can't figure it out, I can't read the preferences panel of Cakewalkt...I hope you can help.
Thank you

Hi DAN,
I hope you can help
I set up vArranger2 as follows:
___MIDI OUT 1: I use " vArranger Software Synthesizer "

___MIDI IN 1: I use for " CHORD RECOGNITION ", I always use " full keyboard" and only use for this purpose... no melody notes.
___MIDI IN 2: I use to command " controllers "

___MIDI IN 3: here I hope DAN will guide me ...
I hope to play melody with the musical instruments in " vArranger Shoftware Synthesizer" maybe "soundfonts" .... I have been looking for the path for MIDI IN 3 for many days but can't... I hope DAN will help me.

Thank you.

I must have a virus, it doesn't let me type the space bar, I can't continue writing, have to shut down, then go back to the forum... I try to say it all....
___if I want to present with full chord type, I create song chords in vRIFF and play with song chords....GOOD.
But a guitarist dreams of playing improvisation, for me that is my main dream: playing with background music from vArranger2 (more than ten thousand yamaha styles, song styles, and being able to make song styles for myself is not too difficult...)
___Only the last 5% is...
___you know the song "Mr. tamburine man" by The Byrds fifty or sixty years ago I heard this line: "now listen i play...
I dream of the day I hold my guitar and say to my friends: "NOW LISTEN I PLAY....!!!! "
___I admire you so much, for me, you are "DAN legrand"
I write too much...

Hi DAN,
Here are the things I can do that I consider 95% successful.
I tested and found that: jamorigin_GUITAR2 works very well, when working with vArranger, I control all the commands in OPTION / CONTROLLER and get the correct results. For example
___with my guitar, the A5 note is a split note, all the notes higher than A5, I control what I want in the controller: intro, fabrication, fills IN, ENDING, start/stop... all the notes lower than A5 I use to call chord... but only major, minor is correct... because with just 1 note I can call major, 2 notes I can call minor...

Hi everyone,
In the past few days, I always get: "This site can't be reached" when entering the Forum, I have reinstalled Win, reinstalled Google Chrome but the result is still unstable, beyond my control of the computer... I see the forum but can't log in, today it gives...
Dear DAN, from many months ago, in controlling vAranger2 with my dream, I have achieved 95%, only this important thing is being discussed, after many months of learning to control, I have worked in "option / master / adjust test midi in GAIN, RECOGNGITION TRESHOLG, hundreds of times... To perform a song, the result is sometimes right, sometimes wrong. I have not dared to brag to my friends even if they are close friends.
The work of inputting from the keyboard is easy and accurate, but from Guitar elec or accou... there must be a solution...
I hope DAN is interested mind.
I find RIPCHORD VST3 so excellent, I think DAN can easily make it work for vAranger2.... and DAN certainly also admits that the number of Guitar players dream of becoming OMB free and independent ( !!!jamtic...omb guitar.... not independent, not free, not creative)
I hope DAN does that.....

I use electric guitar and with jamorigin GUITAR2 gives me midi notes and these midi notes are transmitted by virtual midi cable LOOPBE30 , I choose midiOUT : 01interna... like that in vAranger2 ....Option midiIN : 01interna..
But the result in vAranger2 is not accurate, sometimes correct, sometimes wrong, maybe because vAranger2 can't read in time, maybe because of inverted chords...vArranger2 doesn't analyze correctly....
I am Vietnamese, I write English via google translate, I believe you know GUITER 2, loopbe30, I hope you are a little interested and you check if I do anything more for a really good result....vAranger2 plays exactly the chord I want...HOPE...

Hi DAN,
sorry for just now thanking you for your explanation.
So sad, GIGLAD has a solution for 1 note to create the chord I want....
This is important to me, I control vArrangr2 with guitar with the help of "GUITAR2" the chords received in vArranger2 are not as expected....I have increased GAIN in Option / master ...also....
DAN do you have any attractive solution for this problem?
For the past ten years I have been pursuing vArranger2 for guitar....I have 95% achieved my dream....
Wish you good health.
PS: I apologize to you just now, because I don't understand what my GOOGLE CHROME is doing that this FORUM page and some other pages can't be accessed...

Hi DAN
I found an option in "  SAVE _ startup config._SINGLE FINGER CHORD "
Let me ask,   " SINGLE FINGER CHORD " does it give results according to any rule?
Give that rule.
Thank you.

I hope DAN can guide me,
 how can I play chords with only 1 note?
 Thank you.

Hello DAN
my laptop intel i7, 16 gb ram, i upgraded the hard drive to SSD,\.
Currently I run vArranger in drive C and all 69 files of GNS2 are copied to the SAMPLES folder.
I drag the slider in vArranger to the left and the text "no preload" appears. Am I doing this right or wrong? please guide...
Thank you .

Hi Dan.
I got yamaha soudbank, after unzipping, I got a folder with 69 files.
Now what do I do to use it...in vArranger2 v. 1.20 ?
I have never used samples, I asked on this forum to let new users like me know.
Thank you.

Do you have BIG slow blues?
Take us away.
Thank you.

Do you have BIG slow blues?
Take us away.
Thank you.

Hi DAN
I wrote Dan a letter about the problem of subcribe
Please send me the latest version of vAranger2.
Can I use new usb storage? Can I use it with stylesmagic YA?
Thank you.
P.S sorry Dan, I was impatient so I asked first, will the new version work with the VST3 plugin?

hi Dan,
I will learn to use soundbank later, now you help me get a Yamaha soundbank, currently I only study and work on Yamaha styles.
Please send me the latest version of vAranger2.
Can I use old usb storage? Can I use it with stylesmagic YA?
Thank you.

hi Dan
Please explain this: the exact time to change chords. For example, when vAranger2 plays variation A with 4 measures, from the beginning until the end of the 4th measures, when does vAranger2 receive a new chord to change the chord, and how will it change.?
Thank you.

hi Dan
please point me to the introduction of soundbank products and user manual. I searched the forum and couldn't find it.
Thank you

Thanks Dan,
Thank you v.muller
I used the roland usb cable recommended by Dan, the results were perfect. now vAranger2 has received the Yamaha MU90R with the name UM ONE in the midi out board of vAranger2.
I spent 3 hard days with this.
Thank you

Hi
Dan ,
Igor Electronician.
please help me. I bought an old tones generator Yamaha MU 90R .When I used it with my HP probook 6560b laptop, I connected it from the 8-pin mini din port of the MU90R to the 9-pin serial port of the HP laptop at that time vArrang2 didn't recognize it, does not appear in the vAranger2 Midi out options panel.
All other functions of MU90R are working fine.
Does vArranger2 not work with the serial port of HP laptop? or am I doing something wrong? please help me.
I hope to get an answer soon so I have posted this question in 2 places on the forum. Because of the time limit for returns.
Thank you

Hi DAN,
besides : Root , Type , Bass ... do you give more options : variation ? A, B, C, D ? It's great to play.
thank you.

Thank you , about Yamaha XG VSTI.
Thank you very much Igor Electronician.

Hi Dan,
I used version 1.18.01 + Cruser glide usb
what I must do now ?
I'm sorry about American languead !!!
Thanks,
Phiet

Hi Dan,
Could you send me the new version v1.19?
Thanks,
Phiet

Hi ! DAN
I am newbi...
I have .ins file for my Edirol SD-90,
What I must do in vArranger now .
Sorry Dan about my English language , I am Vietnamese.
Help me.
Thank you

Thank you.

Thank Pingusso .

Thank Deane , Farfaz, Dan .

Thank you .

Thank you ,

Thank you .

Thank you

Thank you

Thank you .

Thank you .

Thank you .

Thank you

Hi ! Dan
thank you very much!

Hi! Dan
Thank you

Hi !  DAN,
I receive your Email ,
I am very bad English,
Now I register My name in Forum is Phiet ,
Thank you.

Hi Dan,
I have buy Varranger with Paypal, I hope everything is good.
Thank you.

Thank You.

Hi, DAN.
I am new, very bad English.
How to buy ?
how to download ?
how to install?
Thank you.