Text only | Text with Images

vArranger Forums

English => The vArranger² Software Forum => Topic started by: Vasik on April 17, 2012, 02:43:37 AM

Title: VB3 Organ
Post by: Vasik on April 17, 2012, 02:43:37 AM
Hi Dan!
I installed the vb3 organ and I don't know
how to do to play it thru the vArranger, but the vArr. doesn't see it.

Vasik
Title: Re: VB3 Organ
Post by: Bernie9 on April 19, 2012, 12:07:42 PM
I have VB3 in Cantabile along with Halion Sonic.  If you use the same procedure as Halion Sonic, and make VB3 active in Cantibile, it should work.
Title: Re: VB3 Organ
Post by: Dan on April 19, 2012, 12:21:50 PM
You have to install and run this
http://www.tobias-erichsen.de/Downloads/loopMIDI_1_0_2_11.zip

Then on cantabile, select the LOOPMIDI for MIDI IN

On Arranger, for MIDI OUT 2, select LOOP MIDI.

Then right click on the RIGHT1 track, and send it to MIDI OUT 2 only.

Let us know

Dan
Title: Re: VB3 Organ
Post by: Vasik on April 19, 2012, 07:25:06 PM
Sorry but from my knowledge i don't know the meaning of the word (cantabile), therefore i don't understand what you are saying. Could you clarify what it means?

Vasik.
Title: Re: VB3 Organ
Post by: Dan on April 19, 2012, 08:00:05 PM
Ok, so was you able to play VB3 organ without vArranger?
It is a VST plugin, you have to load it inside a VST host.
Title: Re: VB3 Organ
Post by: Vasik on April 19, 2012, 09:30:24 PM
Yes, thru Sonar X1.
Just let me know, how to load it inside a VST host?
I know how to do in other DAW's, but in vArranger i don't know how to do it!
I need more explanation.

Vasik.
Title: Re: VB3 Organ
Post by: Dan on April 19, 2012, 10:02:43 PM
You can install and run LOOPMIDI

If you want to use Sonar X1 as VST host, go on it's options : MIDI INPUT, select only LOOP MIDI

You can also use another VST host like

http://www.hermannseib.com/english/savihost.htm

or

http://www.cantabilesoftware.com/lite/

Dan
Title: Re: VB3 Organ
Post by: Vasik on April 19, 2012, 11:39:10 PM
Useless, the indicator of right 1 track is jumping, but no sound.

Vasik
Title: Re: VB3 Organ
Post by: Dan on April 20, 2012, 10:03:30 AM
Do you see the SONAR X1 midi led indicator blinking when you play a midi note?

Read again this steps :

Quote
You have to install and run this
http://www.tobias-erichsen.de/Downloads/loopMIDI_1_0_2_11.zip

Then on your VST host, select the LOOPMIDI for MIDI IN

On Arranger, for MIDI OUT 2, select LOOP MIDI.

Then right click on the RIGHT1 track, and send it to MIDI OUT 2 only.
Title: Re: VB3 Organ
Post by: Vasik on April 20, 2012, 01:58:02 PM
Yes, on Sonar and on Catabile is blinking, on vArranger blinking  too,
but no sounds.

Vasik.
Title: Re: VB3 Organ
Post by: Dan on April 20, 2012, 02:33:04 PM
Maybe it is a question of midi channels.
Right 1 is channel 13
Look at if Sonar is listening to this channel or ONMI
Title: Re: VB3 Organ
Post by: Vasik on April 20, 2012, 04:45:40 PM
On Sonar and Cantabile is selected omni.
Let me know, on Sonar or Cantabile the outputs should be unchecked?

Vasik.
Title: Re: VB3 Organ
Post by: Dan on April 20, 2012, 06:06:14 PM
I just downloaded VB3 Demo...

On top of the VB3 screen, click on GLOBAL OPTIONS MENU, and select UPPER MIDI CHANNEL 13
Title: Re: VB3 Organ
Post by: Vasik on April 21, 2012, 12:24:03 PM
Hi Dan!
Not any results,just is heard trough the computer speaker, not thru the SD2.

Vasik.
 
Title: Re: VB3 Organ
Post by: Dan on April 21, 2012, 08:18:10 PM
The SD2 is not a PC audio card, it's just a MIDI synth module.
You need to find a mixer and plug your SD2, and PC sound to the same speakers.
Text only | Text with Images