Exscuse me, for a simple usb pedal for start stop fill etc... ?
Icon-g board? Or?
I'm an accordionist
Hello, I have this one (https://www.varranger.com/vforum/proxy.php?request=http%3A%2F%2Fimg.pointspub.com%2Fx10%2Fp10%2Fze21_3.jpg&hash=12779909de95d46b315b6af607eb4fe459100e38) it's ok for vArranger you can find in single (https://www.varranger.com/vforum/proxy.php?request=http%3A%2F%2Fecx.images-amazon.com%2Fimages%2FI%2F41C3Bru16pL._SY355_.jpg&hash=b490577e3425e1a6994d9e242d2a7d3eeeca0239)
thanks for the reply
It is sufficient for all the fill and the variations ?
where to buy
I have the Rolls Midi Buddy one and it seems to do the trick with plenty left over. May be a little more expensive at $149 US at standard music stores.
http://www.musiciansfriend.com/accessories/rolls-mp128-midi-buddy-pedal
Thanks,
Terry
Quote from: Diego Di Martino on November 30, 2015, 05:42:56 PM
thanks for the reply
It is sufficient for all the fill and the variations ?
where to buy
You can use "variation up" and "variation down" = 2 pedals.
And you can use "by song controler" for switch to other controls.
But the Rolls Midi Buddy is better of course and more expensive.
Do you already have a pedal, like Ketron FS13 or other ?
Hello Dan,
I have modified a KETRON FS6 footswitch for using with usb. There is a USB-Interface named I-PAC2 from ultimarc https://www.ultimarc.com/ipac1.html (https://www.ultimarc.com/ipac1.html) for 58.- Euro. I have build it into the FS6 housing. (see picture below). It works fine. There should not be a problem to build a FS13 Footswitch, because the I-PAC2 has 32 digital inputs.
Thom
(https://www.varranger.com/vforum/proxy.php?request=http%3A%2F%2Fwww.thoms.ch%2Ftransfer%2F20151201_080201.jpg&hash=4148c7284bca9b4dbbfd60090e07f85b3edcd18a)
No, i avent pedal fs...
I want buy a usb pedal like icon g-board...
Excuse me for bad English...
Icon-g board is OK, but can you still find one in the market? :)
http://www.strumentimusicali.net/product_info.php/products_id/21835
A ave seen this in the Italian site