vArranger Forums

because it sounds the bank 8 are not loaded in track style? someone found this problem.

thank!

Megavoices in yamaha styles are remapped and routed to normal voices, so it can work with any sound module / soundfont / vsti

I know that some people have sampled the Tyros megavoices, and I need to add a way to force megavoices and guitar noises sounds to not be remapped by vArranger

I will do it, and explain how to declare every sound

i do not understand,   excuse me .  I will do it, and explain how to declare every sound.

It is not possible now, but in a new version, it will be possible, and I will explain everything

ok ok . thank Dan.

We wait this some time.... ha ha..  ;)

I have Tyros2 and Im also waiting for this...

I would like to have a midi exit as on an Tyros 4 -
my bank uses superarticulations and megavoices

I have sampled one Mega Voice from my Tyros2 and converted to SF2.
VArranger 2 dont play velocity notes just like Tyros 2 .
On Tyros2 Style played with MV playing notes velocity 60 and 70. On the vA2 the same Style and playing velocity 88 and 100.
I think to play MV I must change Msb in the Style from 8.0.13 to 9.0.13 and then should to play corectly velocity but on every Style and Track this is a lot of work.

1. You need to use the vArranger Software Synthesizer
2. You need to rename your sound with Polyphone and start the preset name with B@

1. I use vArranger Software Synthesizer
2. I have renamed my sound with Polyphone to B@FingerBass
3. When i Load Yamaha Tyros 2 Style with this MV 8.0.17 B@FingerBass it play 0.0.33 Finger Bass(XG)...i try to change but no chance...

Can you send me the sf2? Or post the SF2 INS screenshot

I will send to you just this MV Suond Bass SF2

I have sended to you this MV ElectricBass

It is working here. Try the GM2 mode

On GM2 Mode vA2 dont send FX Notes like slide etc. on SD2, Sd4 and SD1000 Mode is sending this slide but routing is active and routing on 0.0.33 Finger Bass...

Yes, It sends the FX noises if you set the B@ on the name

I set B@ on Name and not work no Fx  noises at GM2 Mode!!!

It should. You can send me the sf2 and the style to test

Allready sended

Your SF2 does not have any noises on it.......

I send you a new one with noises

This SF2 is the 0-0-33 and your style is 8-0-17
They are not the same noises

 8)nikola be sure that Méga -voices work very well with VA  .with the new Yamaha Bank 2 of Réalvision .You can do that yourself .

I have put 0.0.33
Now i change to 8.0.17 B@FingerBass but go automaticaly to 0.0.33 back

Can you send me just 1 MV Bass from yours Yamaha SF Bank to see how shold it be.
Thanks.

Are you still in GM2 mode? It should not change

Yes Im in GM2 Mode?

Dan can you take a look on my PC I have Teamviewer 11!!!

 8) Ah OK I see  your problem
   With polyphone ,go to presets .On top you have " Banque" type number "8"
                                                                                "preset"                         "17"
Now your preset was     008:017
Now right click on this préset and choose rename
  tipe  :    B0@Finger Bass

In options Midi out choose VAsynth GM2 .  It does work

Magali I have Edited with Poliphone and I put " Banque" type number "8"   and    "preset"    "17"
and Preset is 008:017 renamed is too B0@Finger Bass

but steel play 0.0.33 Finger Bass...
                                                                               

Maybe you have saved your style with 0-0-33

It is not just One Style on All Styles, on Tyros5 allso the same.

Will see tomorrow

Dan I hope vArranger send note velocity like Tyros the same value on GM2?
Or we must remap velocity Layer on MV to work corectly with vArranger2?

If you use the B@ with the same program / bank number like in the tyros style, then the velocity will be like the Tyros
Try again until you succeed. Try with styles, not midifiles

Yes I will Try with Styles later when I am at home. Thanks.

Please Dan send me back this Style PopJazz in mp3 File when you have Time...Thanks.

Here is your JazzPop style with our SOUNDBANK#2

I have just raised the tracks volumes

http://www.varranger.com/audio/jazzpop.mp3

Hello Dan
mp3 Sounds GREAT
I am at Home now.
Can you look with Teamviewer 11 on my PC for vArranger and Preset Rename-Change?

Ok, send me an email with you ID

I have sended a email to you

Thanks for your Support Dan Now its TOP!!!