4. INSTALLATION: Difference between revisions

From vArranger
Jump to navigation Jump to search
(Created page with "__NOTOC__ == == After ordering on the website:http://www.varranger.com/Buy_Now.php You will receive the installation instructions within 24 hours, and the vArranger...")
 
No edit summary
Line 7: Line 7:
- Installation on your USB brand (Kingston, Sandisk...), so you can use the software on any  
- Installation on your USB brand (Kingston, Sandisk...), so you can use the software on any  
computer by plugging the USB key before launching vArranger.  
computer by plugging the USB key before launching vArranger.  
This choice is final.  
This choice is final.
Default vA2 starts  in  full  screen,  double  click  on  the  bottom  of  its  main  window  allows  the
dimension at will and a right click opens a popup window  for [[File: save as.jpg]]
recording the starting position of the main window
 
 
[[File:Fig1Interfaceva.jpg]]
                                            '''Fig1: Interface vA2'''
 
 
 
===  WINDOW PROGRAM ===
 
[[File:Fig2.jpg]]
 
 
==== OPTIONS ====
This window shows the available options for the vA2. It allows to configure midi ports, controllers, song chords,Master, Arabic scale. The effects is only available in the yamaha mode.
[[File:Fig3.jpg]]
 
===== MIDI PORTS =====
This  window  allows  you  to  choose  or  MIDI  interfaces that  will  be  active  in  IN  and  OUT from
those connected to the computer.
vA2 can be controlled by one, two or up to three MIDI inputs with the following features:
 
[[File:Tabelle1.jpg]]
 
* Provided that the MIDI interface is provided with several MIDI IN input.
KEYBOARD MODE: By default vA2 KEYBOARD MODE is configured on the MIDI CHANNEL
1 (Fig. 4)
 
[[File:Fig4.jpg]]
ACCORDION MODE: This mode is activated by selectingMIDI ACCORDION, it is then possible
to set the MIDI channel for the right hand (Right),the MIDI channel for the left hand (Left) and
the MIDI channel for Bass (Bass).
 
 
[[File:Fig5.jpg]]
 
Now, only the MIDI ports used are displayed
This window also enables a second and a third MIDI input (MIDI pedal for example)<br><br>
'''MIDI LED FEEDBACK'''
Some MIDI controllers such as the KORG nanoKONTROL2have buttons that can illuminate,
these lights can beings controlled via MIDI.<br><br>
'''VIDEO:'''  http://youtu.be/otV1oLeaLRE
This option gives you a visual acknowledgment without having to look at the computer screen.
For example, we assign 4 buttons variations ABCD arranger, button change during turns.
This option is active in OPTIONS / MIDI PORTS.
In the figure below is selected in the MIDI controller MIDI IN 2nd by checking the LED feedback
box this MIDI (Fig. 6) entrance, you can choose theMIDI port to accept control LED (fig. 7)
<br><br>
[[File:Fig6.jpg]]
<br><br><br>
[[File:Fig7.jpg]]
<br><br>
Note: To accept the control of LEDs, MIDI controller may require adjustments. For example, for
the  KORG  nanoKONTROL2  the  KORG  Kontrol  Editor  program  (available  on  the  website
KORG) and select is used:<br>
- CONTROL MODE = CC <br>
- LED MODE = EXTERNAL
<br>

Revision as of 13:15, 29 September 2014

After ordering on the website:http://www.varranger.com/Buy_Now.php You will receive the installation instructions within 24 hours, and the vArranger software download email. You can choose between two modes of installation: - Installation on your computer (requires no USB, but only works on a single computer) - Installation on your USB brand (Kingston, Sandisk...), so you can use the software on any computer by plugging the USB key before launching vArranger. This choice is final.

Retrieved from "https://www.varranger.com/wiki/index.php?title=4._INSTALLATION&oldid=96"