Foot pedal

[Diego Di Martino]

Exscuse me, for a simple usb pedal for start stop fill etc... ?
Icon-g board? Or?
I'm an accordionist

[Lylo]

Hello, I have this one it's ok for vArranger you can find in single

[Diego Di Martino]

thanks for the reply
It is sufficient for all the fill and the variations ?
where to buy

[4partmusic]

I have the Rolls Midi Buddy one and it seems to do the trick with plenty left over.  May be a little more expensive at $149 US at standard music stores.

http://www.musiciansfriend.com/accessories/rolls-mp128-midi-buddy-pedal

Thanks,

Terry

[Lylo]

thanks for the reply
It is sufficient for all the fill and the variations ?
where to buy

You can use "variation up" and "variation down" = 2 pedals.
And you can use "by song controler" for switch to other controls.

But the Rolls Midi Buddy is better of course and more expensive.

[Dan]

Do you already have a pedal, like Ketron FS13 or other ?

[tthoms]

Hello Dan,
I have modified a KETRON FS6 footswitch for using with usb. There is a USB-Interface named I-PAC2 from ultimarc https://www.ultimarc.com/ipac1.html for 58.- Euro. I have build it into the FS6 housing. (see picture below). It works fine. There should not be a problem to build a FS13 Footswitch, because the I-PAC2 has 32 digital inputs.
Thom

[Diego Di Martino]

No, i avent pedal fs...
I want buy a usb pedal like icon g-board...
Excuse me for bad English...

[Dan]

Icon-g board is OK, but can you still find one in the market?

[Diego Di Martino]

http://www.strumentimusicali.net/product_info.php/products_id/21835
A ave seen this in the Italian site