Can i use BEHRINGER FCB1010 Midi Foot Controller with vArranger2?

Started by paulus1971, April 09, 2015, 02:55:02 PM

Previous topic - Next topic

paulus1971

Hi Dan,

I'm thinking of buying BEHRINGER FCB1010 Midi Foot Controller. Will it be able to control vArranger?

Thank you

magali

 :) Yes it can do that . Personally i use yamaha MFC 10 .Same thing

4partmusic


paulus1971


agaton

All Midi Controller Pedals will work. All of them send Midi Events
to the vArranger2 and you can in Options -> Controllers define
which finctions they have to control.

jbg31792

I'm very happy with the DISASTER MIDI DMC-6, together with the DMC-2 midi foot controller. It's USB powered, and very small.

John

v.muller

I would like to share my solution - how to build own MIDI pedal.

I made my own serial pedal.
Just connect two switches to the COM connector and use my sermid program.
It monitors the serial port and after change it sends midi command.
Then the Midi messages are routed via MIDI YOKE into virtual MIDI IN.
(http://www.midiox.com/myoke.htm)

It works fine for example with program Express Dictate Digital Dictation Software.
(http://www.nch.com.au/express/index.html)

My solution is not direct but WORKS.