vArranger Forums

Dan,

When I save song styles left-hand 1,2 and 3 sounds/instruments to various styles, they all revert to a lower octave sound on recall.

I have to click on the LEFT Main Panel strip next to the STYLE Panel to hear the correct octave each time I change styles.

How do I get the saved User Sounds (highlighted yellow) Left 1, Left 2, and Left 3 Sounds/Instruments to retain their default octave settings.?

Regards.

Can the new Yamaha Genos 2 Styles work with vArranger ?

I keep getting a spinning blue circle when trying to load styles.

Anyone has Korg PA5XStyles to share?

Thanks.

When I save song styles with different left-hand and right-hand sounds/instrument, the Right sounds are changing but the Left 1,2 and 3 sounds remain the same for all styles.

How do I get the Left 1, Left 2, and Left 3 Sounds/Instruments to change with different song styles.?

I sent PM to Dan, but got no response so far. Hope he is OK.

Cheers.

I have laptop 32GB RAM, 500GB SSD, Windows 10 Intel Core , 3740QM CPU Processor, with Presonus Audio Box USB 96 Audio Interface, but sometimes experience latency issues (crackling sounds) on start up of some DAW's and also when using multi layered instruments.

What are the "drawbacks" if any, with using ASIO4ALL, ASIO, or the Low Latency ASIO as an alternate choice?

What will be my best Audio choice for vArranger2?

Regards.

How do I get Hypersonic 2 VST to display the correct "selected" instruments in vArranger "RIGHT 1,2,3" Channel Strips?

Regards.

Dan,
Can you record (Audio) Vocals with vArranger2 similar to BIAB or any DAW.?
VArranger 2 manual is unclear.

Regards.

Dan,

Hope you are in good health.

Since the "Midi Clock Sync In" feature released in November last year, are there any further upgrades/developments being planned?
Whilst other musical companies are frequently updating their products, vArranger seems to be lacking in this regard over the last 9 months.

What's happening with vArranger??? Could you kindly communicate with us?

Regards.

Hi,

Where can I find .sty files based on Motif XS Performances?

Thanks.

Hi.
Anyone has Instrument Definition Files (.ins) for Spectrasonics Keyscape ?

Regards,

The  Wizz.

I am using Korg's Triton , M1 and Roland JV5080 VST Instruments with vArranger. The selected .ins sounds from each VST plays correctly, but the incorrect  instruments (all GM related) are shown in vArranger Instrument Panel Strip and not the .ins instruments as selected.

How do I get the correct .ins instruments to appear in vArranger's Panel Strip?

Thanks for your assistance.

Regards.

Dan,
When creating RIFFS, is there anyway to (1) auto continue replay/repeat at end of RIFF
and (2) say after creating a 12 bar RIFF, to insert/copy/paste those bars multiple times, instead of one bar at a time as it appears?

Regards.

Dan,
I installed a Ketron Style File in vArranger which has some nice RIFFS. How can I copy and save the chords in these RIFFS
for use in other songs?
In OPTIONS > SONG CHORDS they incorrectly overplay chords from a saved song chord file I created.

It would be much easier to copy/paste than figuring out "by ear" the chords used and then input in song chords.

Regards.

Dan,

When I click "send clock" in Midi Out Settings, (Motif XS is selected), I get constant humming and freeze/hang-ups when trying to record midi songs
from vArranger into Motif XS sequencer. It seems vArranger sends continuous midi info to the Motif immediately on sync, even before recording starts.
I have to restart Motif, my computer and vArranger each time to clear the humming noise and record freeze.

Note: Send Clock is always unchecked otherwise.

I have no such issues recording midi into the Motif from Cakewalk or BIAB.

Any suggestions?

Regards.

Dan,
How do I relocate some of my sf2 instruments in vArranger GUI that are shown under the wrong VOICE headings, eg. some Organs under PAD, Guitars under FLUTE, Vocals under STRINGS etc.
When I Copy and Save as user voice under the correct headings it only duplicate voices.
Is there anyway to correct this?
I tried Polyphone to delete/export but to no avail.

Regards.

Dan,

I rename and save Keyscape LA Custom C7 Ballad (Piano) and JD800 Crystal Rhodes (El. Piano) to Style Variations A and B respectively using Song (SAVE SONG) and also the Sound (SAVE RIGHT SOUND / SAVE LEFT.

The new sounds LA Custom C7 and JD800 Crystal Rhodes show correctly as User Sounds in the Right GUI.

When I click on Variation A, LA Custom C7 plays but when I click on Variation B, the name changes correctly but plays the Piano sound of Variation A.

Unlike the sf2 sounds which change and plays automatically with variations, I have to do manually in Keyscape each time.

On Korg Triton and M1 VST's, the sound defaults to their initial instruments settings when I change variation styles.

Am I doing something wrong?

Regards.

Dan,
In addition to the in-built vArranger sf2 sounds, I am also using Ketron SD1000 (in sf2 format).
If I load another sf2 bank say Essential Keys, the sounds in Essential Keys defaults to GM and sound same like Ketron GM sounds.
As an example, 0.0.0 Essential Keys -Yamaha C5 Grand Piano (name remains) but sound like 0.0.0. SD 1000 Grand Piano.(GM), Essential Keys-0.0.1 Large Concert Grand sound like 0.0.1 Rock Piano (GM)

How can I retain Essential Keys sf2 sounds or at least some of them to use with SD1000 sf2 and vArranger built-in sf2 instruments. 


Regards.

Dan,

I recently received your latest updated vArranger v19.12 software, (in future New "2020 Version NEXT").
When I click on some of the Channel Strip Panel, the Main (20) Instrument Panel doesn't respond properly to display instruments in the Right GUI .
As a result, I cannot change instruments.
The Drum and Perc, Accompaniment 3,4 and 5 don't work, the other channels work occasionally, only the Right 1 and Left 1 are working.

How can I fix, or will be corrected in the next upgrade?

The OTS function seems to not save "Right Hand Sounds", however, I will try with more variety of Yamaha Styles on all 4 OTS functions and advise further.

Regards.

All,

Why am I not hearing any of my VST's sounds (Korg M1 and Triton) when used in vArranger VST Host.?

When the actual VST is opened, I hear sounds only if I use my mouse input on the instrument keyboard and not from my Motif xs midi input which also produces no sound in vArranger via sent to the midi out vst 2 as selected in 2nd midi out options although I can see the VST's listed.

It seems as though, the Motif xs midi input is not recognized when using VST's in the Synth Host.

Otherwise, the VST's works perfectly in standalone mode and vArranger software works satisfactory thus far, my problem is with using VST's.

As a new subscriber to vArranger, any help will be appreciated.

Hi,
In addition to Lyrics, can vArranger display Chords when playing midi and karaoke songs similar to Band in A Box?

Regards,

The Wizz.