vArranger Forums

Quote from: evlap on August 10, 2024, 08:06:04 PM

Quote from: The Wizz on August 01, 2024, 06:54:25 PM

Quote from: alpal01 on March 18, 2024, 11:00:20 AMMay I ask where you got the Genos2 styles ? - much appreciated. 

Based on PSR Tutorials Site, you can download Yamaha Genos 2 Styles "revoiced" for use on Tyros, Genos, SX900 and other accompaniment arrangers.

You can also download the original Genos 2 Factory Styles (unaltered).

Regards.

The Wizz, could you point to the exact page where Genos 2 factory styles re-voiced for Genos could be found? Seems like their forum no longer works? My understanding this will be the best fit to be used with Dan's Genos soundfont?

https://www.psrtutorial.com/sty/yamaha/Genos2/genos2.html

The revoiced styles also work with vArranger2 software.

Quote from: The Wizz on January 16, 2024, 03:59:08 AM

Quote from: alpal01 on January 14, 2024, 12:10:45 AMWhere can you find the Genos2 styles ?

Check PSR Tutorials > Forum >Yamaha Genos2 Styles.

You can now download Yamaha Genos 2 Styles "revoiced" for use on Tyros, Genos, SX900 and other accompaniment arrangers.

You can also download the original Genos 2 Factory Styles (unaltered).

Regards.

Quote from: alpal01 on March 18, 2024, 11:00:20 AMMay I ask where you got the Genos2 styles ? - much appreciated. 

Based on PSR Tutorials Site, you can download Yamaha Genos 2 Styles "revoiced" for use on Tyros, Genos, SX900 and other accompaniment arrangers.

You can also download the original Genos 2 Factory Styles (unaltered).

Regards.

Quote from: Dan on October 20, 2022, 02:32:59 PMNot really. Maybe one sound or 2. I will check this with you

Dan,

The Yamaha Genos2 are receiving rave reviews for their new and improved realistic
instrument sounds, e.g. Pianos, Organs, Guitars, Strings etc.

As a follow up to tthoms post, is an upgrade of your YAMGNS-GENOS in the works, or new YAMGNS-GENOS2
Sound bank?

Regards.

Problem solved....
When saving songs (SAVESONG), both the Main Left Track and the Sound Preset have to be
highlighted (Red) to retain the saved sound preset.

Thanks.

 

Dan,

When I save song styles left-hand 1,2 and 3 sounds/instruments to various styles, they all revert to a lower octave sound on recall.

I have to click on the LEFT Main Panel strip next to the STYLE Panel to hear the correct octave each time I change styles.

How do I get the saved User Sounds (highlighted yellow) Left 1, Left 2, and Left 3 Sounds/Instruments to retain their default octave settings.?

Regards.

Dan,

Unlike the launch of version v1.19 update, (based on forum posts), it seems that there is less interest or enthusiasm for this v1.20 update.

Maybe listing of the new features and advantages would be helpful.

The Wizz.

Dan,

Your response to Freakman's valid concerns seems egotistical and bewildering.

It is now over 4 years since I also bought vArranger v1.19 and still have not received the 1.20 version update as you promised.

Your statement/promise is very clear and unambiguous with no attachments to any additional 50 euros yearly payments.

If others made subscriptions (200.00 euros) for the past 4 years without receiving v1.20 version, that's their choice. (Your financial gain)

The forum is replete with users' complaints about these delays.

It now seems that you are now trying to obtain an additional subscription from some users which they already paid.

Dan, you should honestly review your statement be humble and do the right thing.

I look forward to receiving my 1.20 version update.

Regards.



Quote from: Dan on April 26, 2020, 12:14:35 AM
There was the version 1.19, and I am about to release the new version 1.20 with all the news that are written in this NEXT topic plus few more that I am working on it.
Everyone who bought vArranger recently or subscribed to the updates received a version "1.19++" and will receive the 1.20 when it will be ready
This actual version is a special version between 1.19 and 1.20, that includes most features of the 1.20
For now, the little numbers are not very interesting, as they are only minor builds

Quote from: alpal01 on January 14, 2024, 12:10:45 AMWhere can you find the Genos2 styles ?

Check PSR Tutorials > Forum >Yamaha Genos2 Styles.

Quote from: v.muller on December 21, 2023, 06:55:51 PM

Quote from: freakman on December 19, 2023, 06:30:49 AMHas anyone received the 1.20 version?

I got version 1.20 last week after paying for the post. However, this was my first subscription payment. I agree that everyone who paid for a subscription when there were no upgrades should get this update according to the motto: We value our customers.

I am in total agreement. This is exactly the same point stated in my post.
Subscribers who bought v1.19 and haven't received the assured v 1.20 upgrade should also be entitled.
Based on the principle that " A man's word is his bond", Dan should honor his commitment stated above. It's simply the proper thing to do. That is, if we truly value our customers.

I hope that Dan will reconsider his actions.

BTW, what's new in this upgrade?

 

Quote from: Dan on December 08, 2023, 02:50:06 PMHello,

It seems your subscription is expired

You can subscribe again at anytime here : https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=GJL8DC7NEKQR2

And unsubscribe at anytime directly in your Paypal account

Regards,

Dan

Quote from: Dan on April 26, 2020, 12:14:35 AMThere was the version 1.19, and I am about to release the new version 1.20 with all the news that are written in this NEXT topic plus few more that I am working on it.
Everyone who bought vArranger recently or subscribed to the updates received a version "1.19++" and will receive the 1.20 when it will be ready
This actual version is a special version between 1.19 and 1.20, that includes most features of the 1.20
For now, the little numbers are not very interesting, as they are only minor builds

Dan,
I am a bit confused.
I bought version 1.19 with your assurance of also getting version 1.20 when released as stated above.
To date, (through no fault of mine) I still have not received the 1.20 v update you repeatedly promised in
forum posts.
Whilst I realized some time-consuming efforts in software development, this delay (now 4 years) was beyond my control and (IMHO) should not disqualify me from receiving the now released 1.20 version update as you originally promised.

Regards.

Dan,
What are some of the new features in updated version 1.20.02?
Could you expound on subscription fee and entitlements?

Regards.

But I have vArranger2 1.20 version, not v1.19.
The.exe application file reads 1.20.0.0

Could you kindly send me a copy of the 1.20.02 version?

Regards.

Can the new Yamaha Genos 2 Styles work with vArranger ?

I keep getting a spinning blue circle when trying to load styles.

Quote from: agaton on July 30, 2023, 03:14:19 AM

Quote from: eallan on July 24, 2023, 02:14:22 PMAgaton ,
Could you please start a thread about how you use Loops with vArranger?
Would be very interested in how you make Audio Loops Styles and
what Plugins etc you use.

This is a little bit complex. You need one external VST Host like Cantabile, and one good VST Looper. Before I start thread about using Audio Drum Loops in vArranger² I shall upload some Clips about it. Audio Drum Loops brings much live feeling and Groove in a Style. They are no more sterile like Midi Drums. They will be synchronised with tempo of Style in vArranger² and by change of Style Parts inclusive Fill-Ins, Audio Drum Loops play 100% like a normal Midi Drum Tracks. You can start Variations, Intros, Fill-Ins and Endings when you want, it will be played without any brakes or disturbance.

Agaton,
Any update on about using Audio Drum Loops in vArranger²?

Anyone has Korg PA5XStyles to share?

Thanks.

When I save song styles with different left-hand and right-hand sounds/instrument, the Right sounds are changing but the Left 1,2 and 3 sounds remain the same for all styles.

How do I get the Left 1, Left 2, and Left 3 Sounds/Instruments to change with different song styles.?

I sent PM to Dan, but got no response so far. Hope he is OK.

Cheers.

Based on his failure to deliver updates as promised over past 2-3 years, it is now obvious that Dan's brainchild (vArranger2) is now orphaned or moribund.

There is an old saying "One may lead a mule to water, but 20 cannot make it drink"

Regards.

Anyone has the new vArranger2 update Dan promised since 2019.?
If so, will appreciate if you can kindly share with me?

Regards.

Well, here we go again.

I recall, it was 22nd Aug 2019 when Dan said he was working on new version and we pay a 50Euros annual update fee
The latest update released so far (now over 2 years old) is vArranger v1.19.13 with "Midi Clock Sync" feature.

Since then, despite numerous assurances, the developer has failed or refused to deliver as promised i.e. "with 10 GB of samples that takes only 600MB in memory", "new memory streaming technology", "10 VST instruments in live condition", and improved SD1000 DSP amongst others.

A cursory review of user forum posts under this heading vArranger -Updates?? and other similar post will clarify.

Dan's latest excuse for the delay now..... is that he is moving house and Hope to come back more actively soon.

Hmmm...(more actively soon).?

Are we "taken for a ride" or living in a fool's paradise?

Whilst we are on the topic of updates, vArranger2 last update was almost 2 years ago.
Anyone knows what's happening with the promised updates. 😡😡

Just curious.

Quote from: BjayG on April 13, 2022, 01:41:49 PM
Wizz,

Oh Dear!!   Are you finding the headaches are getting more frequent/severe?

Barry

No, but a hallmark of good business is effective communications, which is lacking in this instance.
You may recall, Dan promised many months ago to release the updated version to non SD1000 users, (whilst he sort issues with Ketron).
We are still waiting......
What's happening with the release..... the silence is deafening.

It is also only curteous and polite that Dan issue a short statement on vArranger's update/ progress to date
to keep users and potential informed.
Is this asking too much?

Dan, Is it?

> (I saw in my dream)

I aslo, have a dream, that one day on this forum, not too long in the distant future,we will all receive the update that was promised so long ago.
This is our hope. And when this happens, we will all rejoice with one voice "Thank God Almighty,  at last...at last"

I have a dream.

It seems that vArranger was abandoned a while now and left "orphaned" by it's developer.  What a pity.

Regards.

We haven't heard from you since last December on the subject matter (vArranger2 updates).

I really hope everything is OK and you are in good health.

What's happening with vArranger2 development.?

Could you kindly provide a short statement to users on progress to date.?

Would be much appreciated.

Cheers. 

It is now 1/31/2022, anyone noticed that the Ketron DSP issues have been lingering (unsolved) since March 2018 ?

Our pleads for Dan to release the "completed" new v Arranger version (if actually exists) are all in vain and have fallen on deaf ears.

Thus, any hope of a vArranger2 update is just wishfull thinking.

Just my honest opinion.

Great News at last!!!!

I concur, v Arranger is the best arranger software available.
Looking forward to the new features.

Cheers and keep Safe.

Dan,

Thanks for your prompt response.

Yes, it's known that you seldom talk and talk and talk re the new version.

I am not being sarcastic, but since vArranger is your passion of choice, and
re: your quote "Yes, having some people to help me should be great".

The question still remains.

"Why don't you get help with vArranger's development program?" 

I rest my case.

Dan,

It is my opinion that vArranger was originally created as a musical software arranger for your personal use and not for sale distribution.
However, it have since evolved into a very lucrative business venture on your part eg. € 349 for the software, plus € 50 to transfer licence, (€ 100 depending on upgrade) and € 50 (revolving) donation scheme for updates.

Kudos to you on your insight and musical creative skills.

Lacking then, and even now, (by your own admission,) are supporting services for effective communication, marketing and future R&Development. This don't auger well for future updates.

I am a bit confused, why can't you obtain help as needed? vArranger is now over 10 years.

Your last 2 posts seems to suggest a feeling of impatience or resentment to users highlighting valid concerns regarding the promised update.

Hope I am wrong.

Dan says>Have good hopes for the next week

It's been over 2 years of hoping and waiting.

Regular updates on progress, as repeatedly requested for on past posts and as BjayG suggests, will surely allay current and potential users concerns and mistrust.

Hoping for some improvements in the New Year.

Dan , over to you.

Cheers.

As we fast approach the end of another year of broken promises concerning the subject matter, it seems that vArrangers2 development is now dormant.

Based on Dan's past action/inactions, the prospect of any update soon is improbable.

I concur with Barry's comments, play and enjoy whatever instrument you have or seek other options.

As the song goes "Don't Worry, Be Happy".

Wishing everyone a Merry Christmas and a Bright, Prosperous and Safe New Year.

Quote from: agaton on December 09, 2021, 12:54:14 AM
For the best sake I don't understand so many posts about vArranger² update. vArranger² is, as it is now, by far the best arranger software on the market without any competitor to time. In actual version vArranger² has so many functions nearly as much as no other hardware arranger. It can be arranger, it can be workstation, it can be synth, midi player, audio clip player... and most importantly, vArranger² is stable like a stone. Please, a little more patience, I am shure, the next version will be really new "sweitzer knife". Let's let Dan work !!!

Agaton,

With all due respect, I think you're misconstruing my concern.

I am in no way disputing vArranger's versality nor Dan's ability as a competent VST programmer or coder.

IMHO, I think the problem is Dan's inability to effectively and truthfully communicate to users.

Surely, you are aware of users concerns and anxiety over the past 2 years regarding this long promised update. 

Based on your experience, do you know why the now completed new version (independent of DSP issues) cannot be issued to non Ketron SD 1000 users like myself unaffected with DSP related problems.

I am still awaiting a response from Dan.

Regards.

Quote from: Dan on December 06, 2021, 10:22:51 PM
I sent an email to Ketron today with more midi messages to reproduce the problems.
As I am already late for this release, please don't ask me to promise a date again

Dan,

Just to be clear, you were the one who promised 2 weeks ago, to issue the completed new version (pending DSP issues) because users were unjustifiable waiting to long (2 years) for the update, and rightly so. 

I am again, specifically referring to others like myself who don't use Ketron SD 1000 modules and therefore, are unaffected by the above problems. Since the Ketron DSP issues are unrelated to our use, why the further delays or excuses for not sending us the completed new version as requested.?

Am I missing something? Can you please explain?

Dan,
I noticed you purposely did not respond to Heimatti's query as follows:

So from your response it looks like we get no new version now before Christmas? I am sad....you promised updates so often now so sorry to say but I think I am not the only one here that is in the "first see than believe" mode.

The question is "Are you going to release the completed vArranger2 new version (pending DSP finish) you promised 2 weeks ago?"

Regards.

You may recall 2 weeks ago, Dan acknowledged users frustration and promised to release the new version of the now completed vArranger2 (pending finalizing of Ketron 1000 DSP issues).

Dan quote: I will probably put this on a side and release the new version anyway, as so much here are waiting

We are still waiting.

Is the Ketron DSP DSP1,2 issue is now being used as a ruse or another delaying tactic. ?

After 2 years of broken promises, now that the new version is completed, I find it's discriminatory and unfair to users like myself who don't use Ketron 1000 module to undergo further delays due to issues unrelated to our use with vArranger2.

I don't use Ketron SD1000 module, therefore, I am again kindly requesting the completed vArranger2 new version.

Hoping Ketron SD1000 users will enjoy DSP updates when completed.

Dan, over to you.

Do the right thing.

Dan,

As you rightly acknowledge, it has been an agonizing 2 years wait for this update, DSP issues included.

Since the new version is now completed (pending DSP finalization, hopefully next year), why don't you issue same to non Ketron users if requested?

I don't use Ketron module. Can you kindly send me the updated new version?

Cheers.

Quote from: Dan on November 11, 2021, 06:16:54 PM
As promised, I have worked hard to improve the SD1000 DSP management, and include it in the future release of vArranger.
Unfortunately my efforts are stopped, because I discovered the DSP#1 has not the same audio level than the DSP#2
All my plans and developments to use them in an interchangeable way as DUAL MONO or STEREO are broken   
I will contact Ketron to see if they can correct the SD1000 Firmware

I will probably put this on a side and release the new version anyway, as so much here are waiting


Has anyone received the completed new version (minus DSP issues) as Dan promised 2 weeks ago.?
I thought it's release was without further delay.

Regards.

I totally agree with musicmaker84.

It is a similar suggestion I posted on October 7th,2021. See part extract below:

"My question is "What updates have been completed so far on vArranger during the past 2 years?

If there actually are new development going on with vArranger2, why don't you release the completed updates to users as done my most DAW manufactures.?

BIAB, Studio One, Cakewalk by Bandlab , et al have all issued cumulative updates on their products.

Why not vArranger2?"

I now anxiously await Dan's release of the updated version 1.20 exclusive of DSP issues. (can be issued later when solved.)

This will serve the best interest of all present and potential users IMHO.

Cheers.

Quote from: musicmaker84 on November 04, 2021, 01:06:27 AM
I want to stress I do not imply it was a ploy. Just a plan to fund current and future development. Of course, people were hopeful it meant regular annual updates.

I understand....no offence meant.

And if nothing was delivered after over two years... of the subscription-donation scheme.

It's open to one's own interpretation.

synonyms:
plan · scheme · tactic · manoeuvre · move · course/line of action · gambit · device · wile · trick · ruse

Quote from: musicmaker84 on October 24, 2021, 01:09:32 PM
Probably most of us agree that things could have been handled differently since Dan introduced the subscription-donation scheme.

One of the obvious conclusions has to be that any announcements regarding a date are highly unreliable for reasons mostly unknown.

My decision shortly before my renewal date was coming up after the first year was to cancel the subscription until a new update is ready and of interest to me. This has saved me all the emotions others are going through because of it.
vArranger has worked for and keeps working for me as it is in its current state. Any future updates that offer new functionality for my scenario are welcome. Whenever this might happen, I am going to subscribe again.

Seems that musicmaker84 is very correct in his analysis of Dan's subscription-donation scheme. "Scheme" being the operative word.
Another month have now past, and again still no vArranger update.

Regards.

Notwithstanding, my last post. I am somewhat skeptical with some of your responses as shown below.

Re: vArranger -Updates??
« Reply #2 on: July 01, 2021, 04:01:33 PM »
Quote from: Dan on July 01, 2021, 04:01:33 PM
Everything is OK, the update will come this month.

Posted by: Dan
« on: August 04, 2021, 11:28:59 AM »Insert Quote
No reason to become moribund after 14 years of work
I am finalizing some work for the SD1000 DSP FX as promised to some users. It needs lots of experimentation and discovering as the documentation is not complete
Few days more and it will be ready.

Posted by: Dan
« on: October 01, 2021, 05:19:56 PM »Insert Quote
I am now doing some more real life tests of the new version with 10 GB of samples that takes only 600MB in memory thanks to the new memory streaming technology and 10 VST instruments in live condition
It is very promising, and almost ready to deliver, but today I have noticed that with some heavy projects..........

My question is "What updates have been completed so far on vArranger during the past 2 years?

If there actually are new development going on with vArranger2, why don't you release the completed updates to users as done my most DAW manufactures.?

BIAB, Studio One, Cakewalk by Bandlab (free), et al have all issued cumulative updates on their products.

Why not vArranger2?

Are we just being deceived or duped?

The above is not meant to be an affront on your technical abilities, but an attempt to clarify stated concerns.

Regards

Barry,

Presonus Audio Box USB96 is the name of my Audio Interface.
It is running at 44.1 khz.

Thanks for the useful articles you referenced in last post.

Cheers.

Dan, Barry.

Thanks for the info, I will continue using the USB 96 ASiO Interface Driver.
Will also to check latency settings as suggested.

Regards.

I have laptop 32GB RAM, 500GB SSD, Windows 10 Intel Core , 3740QM CPU Processor, with Presonus Audio Box USB 96 Audio Interface, but sometimes experience latency issues (crackling sounds) on start up of some DAW's and also when using multi layered instruments.

What are the "drawbacks" if any, with using ASIO4ALL, ASIO, or the Low Latency ASIO as an alternate choice?

What will be my best Audio choice for vArranger2?

Regards.

Dan,

Thanks for the update and hope you will endeavor to keep us apprised of your progress on this long awaited vArranger2 development.

I have an issue with some latency.
Will post on appropriate heading.

Again, thanks for the timely feedback.

Cheers.

It is now 1st October 2021, over 2 years since the promised 2020 update.

What is happening with vArranger2?

It seems that further improvements have stopped, and the apparent delays by the developer are likely ruses or smokescreens.

IMHO, the following questions should be answered now, to ease concerns amongst existing and potential users.

1. Is there really a 2020 update?. if YES,
2. What are the new features?
3. Why is it taking so long?

Regards.

Thanks for your assistance.
It is working via the vArranger INS screen (VST button) as Dan suggested.

Cheers.

Yes, I am using vArranger v1.19.
If you change instruments on Hypersonic2 they show incorrect on vArranger.

Regards.

[Today 12:12:51]  >vArranger is still being improved. I am "about" to release a new version

Did you notice that Dan (surreptitiously) did not give a release date for the new version.
Users have being waiting over 2 years now.

Dan, do you foresee any issues with vArranger2 and Windows 11 new update expected next month.?

Quote from: musicmaker84 on September 12, 2021, 02:21:11 PM
I don't have problems with Hypersonic 2 to show correct instruments. I don't recall the exact settings right now, but will check next time.

Still showing incorrect instruments in vArranger.
Would appreciate any help in solving.

Thanks.

Thanks for your quick response.

I did not use the "Send on Midi channel 1" option.

Yes, Hypersonic Instrument banks are numbered 0-0 to 0-120.

Although, I can play multi channels simultaneously, the problem is when I load Hypersonic instruments eg. Grand Piano, Strings and Organ on vArranger RIGHT 1, RIGHT 2 and RIGHT 3 (channel 13,14 and 15 on Hypersonic), they show up as VST 4> Standard, VST 4> New Groove, and VST 4> Forrestal on vArranger channel strip respectively.

I also tried sounds from other banks.....same problem.

Is there anyway to fix this to show the correct instruments on vArranger?

Yes loaded as VST4 in vArranger.

It plays the correct instrument sounds, but on vArranger RIGHT 1 channel they are shown incorrectly as VST4> Drums.

I tried both select/deselect : "Send on Midi Channel 1" on VST OPTIONS.

How do I get Hypersonic 2 VST to display the correct "selected" instruments in vArranger "RIGHT 1,2,3" Channel Strips?

Regards.

Dan,
Can you record (Audio) Vocals with vArranger2 similar to BIAB or any DAW.?
VArranger 2 manual is unclear.

Regards.

Quote from: BjayG on September 01, 2021, 02:01:05 PM
So where are we with this update?   

Its now over 2 years since it was announced (and people were asked to pay annual update fees) and 2 months since we were told that it would be available within a month.     

So has it been released and I have somehow missed the announcement - or is it another bit of vA vaporware.    Its a bit worrying how many people are now selling their copy of vA and I am beginning to wonder whether they know something I don't.

So is there actually any development going on - or are we just being "strung along".

Barry

I also share your concerns.

A month ago we were told "Few days more and it will be ready"

Seeing that subscriptions for this "illusive" update have already expired, I hope this is not a ploy to "hoodwink" vA users to pay additional fees
upon its release.

The Wizz.

Quote from: bluebeat on August 03, 2021, 08:24:57 PM
Hi Dan.
Was this update released?

Here we go again....,after 2 years of waiting on this update, we now have another false promise.
Dan, are you really working on an update....hmmm 2years?

Based on your actions/inactions, it seems that vArranger will soon become moribund or obsolete.

Dan,

It's good to know that you are in good health and an updated vArranger will be released this month.
What are some of the new features in this version?

Regards,

Dan,

Hope you are in good health.

Since the "Midi Clock Sync In" feature released in November last year, are there any further upgrades/developments being planned?
Whilst other musical companies are frequently updating their products, vArranger seems to be lacking in this regard over the last 9 months.

What's happening with vArranger??? Could you kindly communicate with us?

Regards.

Thanks.

Hi,

Where can I find .sty files based on Motif XS Performances?

Thanks.

Hi.
Anyone has Instrument Definition Files (.ins) for Spectrasonics Keyscape ?

Regards,

The  Wizz.

Anyone has Instrument Definition Files (.ins) for Spectrasonics Keyscape ?

Regards,
The  Wizz.

Barry,

See attached, Korg .ins with various Korg Instruments .ins files including Triton.

The Wizz

Dan,
Thanks for your response.

From your experience, can you recall any other well known VST Instruments that works similar to HyperSonic 2 ?

Regards

I am using Korg's Triton , M1 and Roland JV5080 VST Instruments with vArranger. The selected .ins sounds from each VST plays correctly, but the incorrect  instruments (all GM related) are shown in vArranger Instrument Panel Strip and not the .ins instruments as selected.

How do I get the correct .ins instruments to appear in vArranger's Panel Strip?

Thanks for your assistance.

Regards.

Quote from: agaton on April 07, 2016, 10:04:45 PM
Thanx !!! Styles are good, typical Technics
but they all have error: "Bad Style Header"
on vA2 v.1.17.96 and Win 10 64Bit !!!

Agaton,

How to get rid of these errors "Bad Style Header" ?

Thanks for your response.

Dan,
When creating RIFFS, is there anyway to (1) auto continue replay/repeat at end of RIFF
and (2) say after creating a 12 bar RIFF, to insert/copy/paste those bars multiple times, instead of one bar at a time as it appears?

Regards.

Feliz Navidad   
Also wishing everyone a bright and prosperous New Year 2021.

The Wizz.

Dan,
I installed a Ketron Style File in vArranger which has some nice RIFFS. How can I copy and save the chords in these RIFFS
for use in other songs?
In OPTIONS > SONG CHORDS they incorrectly overplay chords from a saved song chord file I created.

It would be much easier to copy/paste than figuring out "by ear" the chords used and then input in song chords.

Regards.

Dan,

When I click "send clock" in Midi Out Settings, (Motif XS is selected), I get constant humming and freeze/hang-ups when trying to record midi songs
from vArranger into Motif XS sequencer. It seems vArranger sends continuous midi info to the Motif immediately on sync, even before recording starts.
I have to restart Motif, my computer and vArranger each time to clear the humming noise and record freeze.

Note: Send Clock is always unchecked otherwise.

I have no such issues recording midi into the Motif from Cakewalk or BIAB.

Any suggestions?

Regards.

Dan,
It's working now, I used Polyphone to change SF2 preset numbers (program change).
Thanks for the info.

Regards

Dan,
How do I relocate some of my sf2 instruments in vArranger GUI that are shown under the wrong VOICE headings, eg. some Organs under PAD, Guitars under FLUTE, Vocals under STRINGS etc.
When I Copy and Save as user voice under the correct headings it only duplicate voices.
Is there anyway to correct this?
I tried Polyphone to delete/export but to no avail.

Regards.

Dan,

I rename and save Keyscape LA Custom C7 Ballad (Piano) and JD800 Crystal Rhodes (El. Piano) to Style Variations A and B respectively using Song (SAVE SONG) and also the Sound (SAVE RIGHT SOUND / SAVE LEFT.

The new sounds LA Custom C7 and JD800 Crystal Rhodes show correctly as User Sounds in the Right GUI.

When I click on Variation A, LA Custom C7 plays but when I click on Variation B, the name changes correctly but plays the Piano sound of Variation A.

Unlike the sf2 sounds which change and plays automatically with variations, I have to do manually in Keyscape each time.

On Korg Triton and M1 VST's, the sound defaults to their initial instruments settings when I change variation styles.

Am I doing something wrong?

Regards.

Dan,
Thanks , I use Polyphone and rename Essential Keys sf2's to 2@.......etc.
They are working in vArranger, but some instruments are sent to incorrect sound classifications.
Example:  Strings>Guitar, Piano>Bass, Trumpet>Electric Piano etc.
I saved as USER RIGHT SOUND, but end up with duplicated sounds.
When I delete the initial sf2 instrument in Polyphone, the USER VOICE then changes to GM sound.

How can I delete incorrect place sf2 sounds in vArranger? What happens if I rename sf2's as 1@.......?

Regards.

Dan,
In addition to the in-built vArranger sf2 sounds, I am also using Ketron SD1000 (in sf2 format).
If I load another sf2 bank say Essential Keys, the sounds in Essential Keys defaults to GM and sound same like Ketron GM sounds.
As an example, 0.0.0 Essential Keys -Yamaha C5 Grand Piano (name remains) but sound like 0.0.0. SD 1000 Grand Piano.(GM), Essential Keys-0.0.1 Large Concert Grand sound like 0.0.1 Rock Piano (GM)

How can I retain Essential Keys sf2 sounds or at least some of them to use with SD1000 sf2 and vArranger built-in sf2 instruments. 


Regards.

Quote from: Dan on November 30, 2013, 07:29:50 PM
I sent you an email

Dan,
I downloaded the "500 SONG STYLES + MIDIFILES + LYRICS + CHORDS".
How do I install in vArranger to create playlist?

Regards.

Dan,

Yes, I can SAVE RIGHT/LEFT Sounds, drag & drop into the MY SOUNDS bar, recall and save many instruments (registrations) for various styles and A,B,C and D accompaniments. This not a problem.
I am specifically referring to OTS Single and Multi Sounds programmed by the style creator. It seems that these "bonus ideas"    resides only in the OTS and cannot be saved independently as SAVE RIGHT/LEFT SOUNDS as you mentioned. It is also noted that the highlighted (selected) OTS disappears when trying to SAVE.

Regards.

Dan,

Followed your instructions.

I saved OTS (1,2,3 and 4) as RIGHT SOUNDS , gave new names and saved as other presets.
It seems that the Main (20) Instrument Panel doesn't "see" these changes to automatically display instruments in the Right GUI
and the Channel Strip Panel.
On using the same (revised) style again, you have to manually select Instruments on Main (20) Panel Menu and then click on Right GUI
to show on Channel Strip Panel.

If you click OTS 1,2,3,4 again, instruments as shown on Channel Strip Panel, but they are not reflected in Main (20) Panel Menu or Right GUI.

Could this be implemented in next upgrade to automatically link OTS instruments with Main (20) Panel Menu and Right GUI?

Notwithstanding the above, the updated vArranger v19.12 software appears to be working satisfactorily so far.

Regards.

I have to do this manually for every track on each style to work. It would help if done automatically I observed on a previous version.

The same applies to the 4 OTS function (excellent idea). The following is what I did:
I select a style, choose Variation A, click on OTS 1, instrument changes on RIGHT Sounds, I do SAVE RIGHT SOUND. The Sound is saved automatically in RIGHT or the LEFT track, close to the master fader.

If I choose OTS 2 for the same style, instrument changes on RIGHT Sounds but when I do SAVE RIGHT SOUND, The Sound/s is NOT saved in RIGHT or the LEFT track unless I manually change and save . It retains the sounds from OTS 1. The same applies if I use other Variations or OTS 3 &4.

Could you advise of correct procedure?

BTW, are the OTS link to the 4 variations?

Regards.

Dan,

I recently received your latest updated vArranger v19.12 software, (in future New "2020 Version NEXT").
When I click on some of the Channel Strip Panel, the Main (20) Instrument Panel doesn't respond properly to display instruments in the Right GUI .
As a result, I cannot change instruments.
The Drum and Perc, Accompaniment 3,4 and 5 don't work, the other channels work occasionally, only the Right 1 and Left 1 are working.

How can I fix, or will be corrected in the next upgrade?

The OTS function seems to not save "Right Hand Sounds", however, I will try with more variety of Yamaha Styles on all 4 OTS functions and advise further.

Regards.

Dan,
In VST Host options I checked "Send to Midi Channel 1" and everything is working now.
I can hear sounds from both Triton and M1 VST's.

Thanks again.

Dan,

Yes, the VST is on vArranger Right 1 Channel 13:

Send to MIDI OUT 1= Grand Piano (Internal Synth sound).
Right 1 Channel 13: Send to MIDI OUT 2: VST= 01- Triton, 02 - M1.

When I select Send to MIDI OUT 1, I can hear the Grand Piano (Internal Synth sound),
but when I select Send to MIDI OUT 2  and choose either Triton or M1 I get no sounds.

Thanks for your assistance. 
 

All,

Why am I not hearing any of my VST's sounds (Korg M1 and Triton) when used in vArranger VST Host.?

When the actual VST is opened, I hear sounds only if I use my mouse input on the instrument keyboard and not from my Motif xs midi input which also produces no sound in vArranger via sent to the midi out vst 2 as selected in 2nd midi out options although I can see the VST's listed.

It seems as though, the Motif xs midi input is not recognized when using VST's in the Synth Host.

Otherwise, the VST's works perfectly in standalone mode and vArranger software works satisfactory thus far, my problem is with using VST's.

As a new subscriber to vArranger, any help will be appreciated.

Dan,
See attached : Beatles - "Something" .kar file and "A Whiter Shade of Pale" .mid file for testing chords display. Both files have lyrics.

Thanks.

Hi,
In addition to Lyrics, can vArranger display Chords when playing midi and karaoke songs similar to Band in A Box?

Regards,

The Wizz.