Hello Dan,
First post to the Forum.
**** Can you add extra controller Numbers/Functions under the Options/Controllers/Navigation section for each of Left 1,2,3 Right 1,2,3,4 & 2nd Voice - so that I can assign a hardware button for each one that directly selects and highlights the respective track in the Left/Right mixer section*****
(http://i247.photobucket.com/albums/gg137/ianmcw/OrganForum/1%20Navigation%20Controllers%20-%20Modified_zpsxl3sgtq9.jpg) (http://s247.photobucket.com/user/ianmcw/media/OrganForum/1%20Navigation%20Controllers%20-%20Modified_zpsxl3sgtq9.jpg.html)
I am using vArranger and I like it a lot, particularly combined with my Novation Zero SL Mkii. It is working very well with the LED feedback.
(http://i247.photobucket.com/albums/gg137/ianmcw/OrganForum/1%20Novation%20Zero%20SL%20Mk2_zpsiqa00vtp.jpg) (http://s247.photobucket.com/user/ianmcw/media/OrganForum/1%20Novation%20Zero%20SL%20Mk2_zpsiqa00vtp.jpg.html)
I am using the slide faders to control the track volumes for Left 1,2 & 3 and Right 1,2,3,4 & 2nd Voice. The first row of buttons under the faders are being used to select Track On/Off so that I can layer sounds. The buttons are showing Left1 On (under the first fader) and Right1 On (under the fourth fader).
I want to use the bottom row of buttons to directly select each Track/Part (Left 1,2,3 or Right 1,2,3,4 & 2nd Voice) so that I can then assign sounds to that particular track.
I have tried to do this using the Options/Controllers function. However there are only controllers for 'Track Select Right' and 'Track Select Left' (these work OK but they select the Right and Left virtual faders over in the Master Fader section - not the Right1 or Left1 Track in the Left/Right mixer section)
Can you add extra controllers under the Navigation section for selecting Left 1,2,3 Right 1,2,3,4 & 2nd Voice so that I can assign a button for each one that directly selects and highlights the respective track in the Left/Right mixer section?
At the moment I have to try and find the mouse and click on the desired Track to select/highlight it. Once the Track is selected I can then use other buttons to select the desired sound for that Track.
This would then emulate the PART SELECT function on a Hardware Arranger as per the red boxed section on the Tyros5 below
(http://i247.photobucket.com/albums/gg137/ianmcw/OrganForum/tyros561%20-%20Copy_zpsfyyalft1.jpg) (http://s247.photobucket.com/user/ianmcw/media/OrganForum/tyros561%20-%20Copy_zpsfyyalft1.jpg.html)
Also there is no controller that allows me to switch between the Right, Left and Left/Right views in the 'My Sounds' section. Again I have to find the mouse and click on it to scroll through the My Sounds views.
It would be very useful that when I select Left1 or Right1, the My Sounds view automatically switches to display My Left or My Right Sounds. e.g. In the image below I have Left1 selected and My Sounds shows the Left Sounds view.
(http://i247.photobucket.com/albums/gg137/ianmcw/OrganForum/1%20Left1%20Selected_zpsmewxq0am.jpg) (http://s247.photobucket.com/user/ianmcw/media/OrganForum/1%20Left1%20Selected_zpsmewxq0am.jpg.html)
regards
Ian
Hello, everybody.
I agree with momboc:
**** Can you add extra controller Numbers/Functions under the Options/Controllers/Navigation section for each of Left 1,2,3 Right 1,2,3,4 & 2nd Voice - so that I can assign a hardware button for each one that directly selects and highlights the respective track in the Left/Right mixer section*****
Dan, but not only for Left 1,2,3 Right 1,2,3,4 & 2nd Voice - also can you add extra controller Numbers/Functions under the Options/Controllers/Navigation section for each track: drums, perc, bass and etc.? is it possible to do?
Thanks for you reply!
Hello,
I have added SELECT TRACK 1 to 16 in the Controllers screen.
You can now select every track with separate buttons and get the led feedback too. So you will be able to do like the Tyros, and more....
Sent this new version to momboc and slaveofword to test it.
Hello, Dan!!
I am very grateful for your quick response and solution to the problem !!!
everything works fine in TouchOSC. Many thanks!!!!
Regards,
God bless you.
Hi Dan,
please send me also this new version.
Best regards Werner
Hi Dan,
In the list of vArranger controllers, I don't see 16 buttons that allow me to directly select any one of the 16 tracks without the mouse.
I only see for each individual track, the following: Track On/Off, Track Solo, and Track Volume. But not Track Select.
When will this be available to everybody please? I only have a 7 inch screen in my organ, and it is much easier to use hardware buttons to do this task of track select as well please.
Brian.
Guten Morgen
Eine Frage: SELECT TRACK 1 bis 16 oder Track Select 1 bis 16 Ist das das gleiche???
Ich habe Track Select
Wolfgang
Guten Morgen Wolfgang.
Obwohl ich aus deutscher, britischer und duch Abstammung bin, spreche ich nur Afrikaans und Englisch und nicht Deutsch. Ich hoffe, dass Google Translate diesmal freundlich zu mir sein wird.
Die Version von vArranger, die ich habe, hat keine Spurauswahl für jede Spur. Ich habe nur "Track Volume", "Track Solo" und "Track On / Off". Ich hätte gerne "Track Select 1", bis "Track Select 16".
Brian.
Dan,
Perhaps you have done this already, and I just don't have the right version.
Can I please get the correct version that also has "Track Select 1", "Track Select 2", "Track Select 3", ..................... "Track Select 16", please. Those will go as buttons on my Yamaha organ upgrade project.
So each channel will then have the following:
Track Select, Track On/Off, Track Solo, and Track Volume.
Look at all the CONTROLLERS list. you will see TRACK SELECT
Dan,
I only see the following:
Navigation: 82 Track Select Dial
83 Track Select -
84 Track Select +
93 Track Select Right (hand)
94 Track Select Left (hand)
And then I also see this, for each track individually:
Mixer 64 Volume Track 1
65 Volume Track 2
66 Volume Track 3
67 Volume Track 4
68 Volume Track 5
69 Volume Track 6
70 Volume Track 7
71 Volume Track 8
72 Volume Track 9
73 Volume Track 10
74 Volume Track 11
75 Volume Track 12
76 Volume Track 13
77 Volume Track 14
78 Volume Track 15
79 Volume Track 16
212 Track 1 On / Off
213 Track 2 On / Off
214 Track 3 On / Off
215 Track 4 On / Off
216 Track 5 On / Off
217 Track 6 On / Off
218 Track 7 On / Off
219 Track 8 On / Off
220 Track 9 On / Off
221 Track 10 On / Off
222 Track 11 On / Off
223 Track 12 On / Off
224 Track 13 On / Off
225 Track 14 On / Off
226 Track 15 On / Off
227 Track 16 On / Off
298 Track 1 Solo
299 Track 2 Solo
300 Track 3 Solo
301 Track 4 Solo
302 Track 5 Solo
303 Track 6 Solo
304 Track 7 Solo
305 Track 8 Solo
306 Track 9 Solo
307 Track 10 Solo
308 Track 11 Solo
309 Track 12 Solo
310 Track 13 Solo
311 Track 14 Solo
312 Track 15 Solo
313 Track 16 Solo
I want to be able to select the track with a button, and then select the sound I want for that track.
I just send you the latest version 1.18.02
it seems you are using an old version
Thank you Dan. I'l lulpdate that list of midi controllers now too.
Hi Dan,
Thank you, I see you have made some great midi controllers in this new version that you've sent me - all the extra midi controllers that I asked for, plus some ones that I didn't even know I wanted, until I saw them in your list in vArranger....... I am very excited. I have a midi encoder that can read 320 digital inputs, and 64 analogue inputs. I am planning on installing my 2nd midi encoder, which has 128 digital inputs, and 128 digital outputs (combined midi encoder and midi decoder). So I'll be adding LED's where I can. On my first encoder, I connected the two manuals and the pedal-board.
I'm still busy applying varnish to my project, before I can start installing the buttons, and then the wiring of the buttons with diodes, and rotary and straight faders, and also my Hammond drawbars, can begin.