(https://www.varranger.com/vforum/proxy.php?request=http%3A%2F%2Fi66.tinypic.com%2F2eal5k3.jpg&hash=c027914c3e5dfa06458bda44a400d7c982b42474)
Very good !
You make that in paper ?
Very well done :)
akyelken san, どうもありがとうございます!
Thanks a lot! It works fine even with a simple paper print.
Hello,
It looks very well, and is very practice. Unfortunately the layout is bigger than A4 and one have to enlarge the jpg and divide it on two A4 pages or print it on A3. How we can I make the jpg 1:1 printable in the right scale (enlarge factor)?
Thank you very much.
Thom
Hi,
printing the right size is a challenge! I used Windows fotoviewer, A3 paper, foto size 20x25 cm and scaled up to 126%. It was a bit too small, so I had to cut the print in 3 parts to fit it to the Nanokontrol. Maybe Akyelken will come back with some good advice...
Cheers.
Pierre
Hello Pierre,
I have made now my own layout for the nanokontrol2 with the tool Microsoft-Visio. It is not so good designed as this from akyelken, but one can improve the layout. One can change the texts with the tool and then print out in A3 or in two A4 sheets. If you wish I can send you the visio data file, so you can make your own layout.
Thom
(https://www.varranger.com/vforum/proxy.php?request=http%3A%2F%2Fwww.thoms.ch%2Ftransfer%2FthomsNanokontrolLayout.jpg&hash=a5410938782195e3c604953ecf38853c3aaed7ac)
Very nice all !
Hi Thom,
Very nice design also!
Many thanks for your generous offer :) but I don't have MS Visio and it seems to be an expensive bit of software :o ....
Pierre
Quote from: akyelken on December 27, 2015, 01:07:12 PM
(https://www.varranger.com/vforum/proxy.php?request=http%3A%2F%2Fi66.tinypic.com%2F2eal5k3.jpg&hash=c027914c3e5dfa06458bda44a400d7c982b42474)
It looks nice. I found this web site, but the skin doesn't seem to fit perfect when I uploaded the file. I was going to order one if it fit the Nanokontrol 2 http://styleflipbeta.com/korg-nanokontrol-2-skins-custom-sticker-covers?action=flashdesigner&productId=485&faceId=2431&option_id=26488&attribute_id=7212#
hello -my new Korg nanokontrol2 with vArranger skin.regards
the total cost of materials 2 euro
https://zapodaj.net/178e274fc13ae.jpg.html
It looks very nice. I just miss buttons for intros and endings. (3 + 3)
Very nice layout!
Dan and all, I wonder what are the corresponding MIDI system exclusive message values of vArranger to these buttons and sliders? I could not find these specifications in the vArranger's owner's manual or this forum.
Any help will be greatly appreciated.
Thanks,
Paul
You don't need to send specific sysex messages to vArranger
You go on OPTIONS / CONTROLLER, select a function to control, and press your button. It's done !
Here I explain how to set the NanoKontrol to have the LED feedback too !
https://www.varranger.com/vforum/index.php?topic=903.0
Hi Dan,
Now I see that you have a GUI through Options / Controller of vArranger to detect and accept the MIDI signals triggered by pressing the buttons of the external MIDI controllers as the recognized pre-configured buttons.
I found that the configuration for Korg nanoKontrol2 through USB is more robust, whereas the configuration for Yamah MFC10 through MIDI in sometimes causes errors, but if I press "Continue" the Options / Controller still continue to function. When I got stuck, I had to reboot the Windows laptop to clear up and resume with Options / Controller.
Somehow, I do not know for sure which vArranger controller functions corresponding to the following buttons in akyelken's skin:
Knobs:
Drum
Perc.
Bass
Acc1
Acc2
Acc3
Acc4
Acc5
Faders / Sliders:
Right1
Right2
fX1
fX2
Buttons:
Style back
Style next
< Page style
Page style >
< Page sound
Page sound >
SELECT my sound
SELECT RIGHT Play Track
2nd Voice
Panic
Plugin VST
Thanks,
Paul
Hi akyelken,
I love your wonderful nanokontrol2 skin. Thank you for sharing your excellent work.
May I ask if your can provide the following :
1. A map showing which button of the nanokontrol2 is assigned to which [Control xx] in the INI file?
2. Controller function you use for the following buttons :
< Style back
Style next >
< Page style
Page style >
< my sound
my sound >
< page sound
page sound >
< Track back
Track next >
Select my sound
Select RIGHT Play track
3. Which software do you use to create this skin ? May I ask if you can show me a way to modify it to create my own version ?
Thank you so much in advance for your help.
Regards
Thanh